Door sills stickers "Duster" set
Quantity : 4 pieces / set
2 pieces for front door sills - 58 x 4.5 cm
2 pieces for back door sills - 38 x 4.5 cm
The stickers are made of high quality vinyl (ORACAL) and die-cut without white background.
They are resistant to UV, external climatic factors and repeated washings.
If possible, do not install below 15 degrees ambient temperature.
1.Clean the area that the vinyl will be applied. All dirt and wax must be removed to give the vinyl proper surface to adhere to.
2.Remove protective backing from vinyl.
3.Begin to apply vinyl to the vehicle. Make sure that you are ready because once the vinyl is down, it will be very hard to adjust. If you don't feel comfortable with this method, then see the instructions on how to apply vinyl using the wet method. It allows for the vinyl to be adjusted once it is laid down.
4.Start at one end of the vinyl and work your way to the other end, making sure not to leave any air bubbles on the part that has already been laid.
5.Slowly peel the transfer material from the face of the vinyl. If the vinyl should detach from the surface, squeegee that part down again.
Enjoy the new style and personal touch you’ve added to your vehicle!